Hello Thanks for looking. This sled has a stage 2 mpi super charger. It is set up for 10k feet. I do have the pulleys to change the set up it takes about 45 mins to change it over to the sea level set up. I have done this twice in the Three years that it has been super charged. The sled runs at 10lbs of boost at 10k ft. The sled has the new skinz front end on it with fox float 2 which makes it easy to carve and lay over in the powder.The new air frame running boards which are amazing.it has an articulating bar riser on it.after market sly dog deep keel skis.after market exhaust that is not loud but sounds real nice. The track is the arctic cat claw an is great in the powder 162x15x2.5. I installed a jacobs valve on this machine. which is a check valve that goes on the oil breather to keep it from emptying out if it rolled over, also has a tether so if you get removed from the machine it will shut down.The rear skid has been gone thru and had all the bushings and springs replaced the shocks rebuilt also. The front end has been cross braced to help with the torque and to take the abuse of riding the mountains. this sled pulls like no other sled you"ve riden. I have most of the eom part for this sled like the front bumper and shocks springs and ton of the random things like the exhaust. It runs about 240 hp in the mountains.and if you dont change the pulley for sea level it will pull 320hp on race fuel at sea level. if you change the pulleys though it runs at 240 hp on pump gas. can be pretty fun itll pull wheelys at even 50 plus by hitting the throttle. comes with the gps also,The sled is out west still at a friends place in the snowies in Wyoming, I will or can help with delivery between Laramie,WY an Milwaukee,WI If you have any questions feel free to email me at Bfdfireman35@gmail.com Thanks Brian
Like I mentioned I have about 900-1000 dollars in yamaha parts for this sled ill include all of it. It comes with a rear two wheel kit also, There is a 153" tack that has 4-5 trips out west on it. a skid plate or float plate. WRP running boards that came off to install the air frames. I have extra stock shocks etc all kinds of fun things.... thanks
Like I mentioned I have about 900-1000 dollars in yamaha parts for this sled ill include all of it. It comes with a rear two wheel kit also, There is a 153" tack that has 4-5 trips out west on it. a skid plate or float plate. WRP running boards that came off to install the air frames. I have extra stock shocks etc all kinds of fun things.... thanks
Last edited:
