08 D7 No Dash Lights at low RPMS

[Boat2Sled]

Has new VR, worked fine for the first couple of hours. The ECU wasn't replaced but it didn't appear to be blistered on the back. Unplugged the handwarmers trying to see what has faulted? Can a bad stator be causing this? Any help is great Thanks!

 

[Ski-Dont89]

how low of rpms are we talking

 

[08poo800]

my 08 800 did that last year and it turned out to be the stator.

 

[07dragon]

similar problem here... had a bad vr and burnt up ecu last year, got both replaced, now at 5000 feet idles about 1400-1450 rpm. in the mountain cold or warm motor, 8000-10,000 feet it idles down to like 1100- less than 1000. once it goes below 1000, the digital dash shuts off. to low idle to put into reverse too

 

[theshadowrider]

similar problem here... had a bad vr and burnt up ecu last year, got both replaced, now at 5000 feet idles about 1400-1450 rpm. in the mountain cold or warm motor, 8000-10,000 feet it idles down to like 1100- less than 1000. once it goes below 1000, the digital dash shuts off. to low idle to put into reverse too

This is probably due to your tps. Many have found that even most dealers don't take the time to set them up perfectly. go http://www.snowestonline.com/forum/showthread.php?t=67427
to read how to do it yourself. I just did it and its not that bad.