I had just installed the boondocker nitrous kit on my 08 700 dragon, the kit was in and complete, started the sled everything ran fine the control box came on all was good. shut it off now I can't get it to start. I've takin the nitrous kit out of the electrical system. I've tested the key switch, kill switch as per the schematic. I'm getting only 3-4 VAC coming out of each stator wire when I pull it over. I get 3-4 VDC out of the VR. I've replaced the VR and installed a used stator. still have the same results. I tried an ecu out of my friends sled, still nothing. Is it possible my new "used" stator is faulty or is this normal. I'm totally stumped and just want to go sledding already. Help