07' M8 Riser Question

[M-Slednutz]

Got a two inch riser on my M right now and want to go about four or five if possible. What is everyone doing? Also I want to get some different boards.. dont like kicking snow.. What to get? Cutlers. Better Boards. Eliminators. Or No Snos???

 

[89sandman]

3 inch was pretty tight on my 07, you could probably squeeze a 4 inch in there. on the 07 the nosnos are absolutley the best you can buy. you will not have to ever worry about snow in the boards again. the snoweliminators still have to be kicked out, snow sticks to the aluminum, nosnos are plastic with no snow build up. you will love them i guarantee it they are my favorite mod on my sled...

 

[Sled Solutions]

WRP Running Boards add strength and solve the problem of snow build up....oh and they look cool!!

RSI risers will get you more height on the bars which we sell also.

 

[richardsb014]

89sandman is right. Nosnos are the ticket. Installed mine last year and all my buddies were amazed...no snow biuldup.

Going to increase from 2" riser myself. Not sure 4" will work without extensions, but I will try.

 

[Blk88GT]

I use a ROX 5" riser, RSI extended brake line and stock throttle cable to make it all work.

 

[Deanearl]

Just installed the new adjustable Cat handlebars like the 09 M8s on my 07 M8 and there was enough cable for it...I think it raises up to about 4 inches. Couldn't be any longer though I don't think.

 

[m8magicandmystery]

no-snows mean what they say...no-snow...great great product

 

[blackcloud2k]

I have a 4" riser on mine with no extensions. Works just fine. I only had to cut one zip tie to give me plenty of cable. All sleds are a little different but you should be able to pull it off no problem.

 

[jdrmk900]

riser

i have a 3.5 inch riser on my 07. also have no snows and they are the best mod i have done to date. well worth the money!!!!

 

[Headrush]

I have an Ole's riser on mine its the 3" and works great. 4" would be too tight without doing extensions.

 

[WyoBoy1000]

4" on mine but I cut the zip tie on the brake line and move the throttle cable to the other side of the motor, plenty of room. I'm 6'6" and 4.5 is all the taller I would go 5 and up is to tall.

 

[XFIRE800]

I have a 4 inch oles on there with no problems

 

[Skinner]

4" on mine but I cut the zip tie on the brake line and move the throttle cable to the other side of the motor, plenty of room. I'm 6'6" and 4.5 is all the taller I would go 5 and up is to tall.

Thats all I did too.

I have a 4 inch oles on there with no problems

Went with the ole riser too. Great product

 

[M-Slednutz]

Ya i think i might have to go with the nosnos... I wanna get at least three but might check into goin little more.. where would i get the RSI brake extension.. that looks like it would be the tightest.. anybody got a good deal on some no snos??

 

[CuzzinOlaf]

I have a 5 inch on my 2008. Not sure what is different but I have no extensions at all and it works fine.

 

[Putzy]

I have a 3" rox and I couldn't go much bigger without getting a brake and throttle extension

 

[Rowdy1132]

bot an oles moves it forward and up. best thing out there, good luck