07 M1000 RKT setup?

[harf69]

Who is running a rkt head with the speedwerx ypipe pipe can and RKT porting on an 07 M1000 and what kind of results did you have with it.Howed it run and 9is it worth the coin to do it?I have the head and pipe setup and Im thinking about porting it just want to make sure its worth it before I pull the trigger any imput would be great thanks.some people say the head sucks

 

[Qreiff]

Hmmmmmmmmmmmm..........

I would like any info also. I have all the same setup and I too am interested in porting now.

Any info peoples????? Or has everyone gone turbo?!?!?!

 

[harf69]

I was told about 220hp but you never know I have heard good things about thr rkt head and a few bad and Im trying to sift through all the bull****

 

[Skinner]

TTT for you buddy

 

[jim]

I've been around a few people who have knowledge of the porting set-ups of these sleds. First off, you have to port the cases to get anything out of the cylinders. Secondly, it is not much of a gain over stock. This is from a knowledgeable tuner. As for the head...I've run it with great success for the last two years...great head.

All that said...best running sled I've seen was a M1000 with the head and twin pipes...but the guy had to run a few gallons of race was with the pipes. He was running the Cutler set-up...but that is not much different from the RKT head with twins set-up. He had an aftermarket airbox also...I think an SLP but can't remember for sure.

 

[harf69]

thanks for the info keep it coming

 

[Going West]

Also very intrested any input from someone who's had the porting done. I also heard about 220-225.

Any one run a ported piped 1000 against a pump gas m8

 

[smoothdawg]

PM Scaldedcat, he has RKT head, SW pipe, SW tunnle dump can, BDX intake, and SW porting. Saw it run, looked good and sounded good.

 

[harf69]

thanks for the info keep it coming

 

[scaldedcat]

I have the SW pipe,can,power advantage can rkt 14.5 head ported airbox mod
It runs crisp and sounds very angry LOL best its ever ran but I can't seem to get the clutching rite anyone have some input with the same setup?

 

[9071000]

ive been running his setup on my sled for 2 years. stock porting.there is no comparison to a stock sled very reliable and low temps.i would recomend it.

 

[scaldedcat]

907100 what are you using for clutching what elevation are you riding ? HELP please.