D Dirty10 Well-known member Dec 12, 2011 #1 off a 2007 M-1000, Torque line head and secondary clutch kit was on sled that had around 400 miles before crached. $300.00 OBO Last edited: Jan 4, 2012
off a 2007 M-1000, Torque line head and secondary clutch kit was on sled that had around 400 miles before crached. $300.00 OBO
0 02SummitX800 Active member Lifetime Membership Dec 14, 2011 #3 Will this fit a 08 or 09 m1000 or not. Also what compression ratio are the domes and what altitude and fuel are they for. Let me know, thanks
Will this fit a 08 or 09 m1000 or not. Also what compression ratio are the domes and what altitude and fuel are they for. Let me know, thanks
D Dirty10 Well-known member Dec 15, 2011 #4 the head will work on both but the clutch kit will only work on the 08 because of the reverse. The head is a pump gas thats all I know for sure, I will look and see if I can find anything else on it.
the head will work on both but the clutch kit will only work on the 08 because of the reverse. The head is a pump gas thats all I know for sure, I will look and see if I can find anything else on it.
0 02SummitX800 Active member Lifetime Membership Dec 15, 2011 #5 what altitude were you running at with the head, tell me that and I will know the compression ratio from there.
what altitude were you running at with the head, tell me that and I will know the compression ratio from there.
0 02SummitX800 Active member Lifetime Membership Dec 15, 2011 #6 Got a phone number or email. Interested in makeing an offer
D Devilmanak Well-known member Premium Member Dec 16, 2011 #8 The comp ratio will be etched into the domes on the coolant side.