06 m7 diamond drive which route to go

[theUltamateTBM]

Hey all today on our ride my diamond drive started to leak so I cut ride short and got it home and got it pulled out in the process the long bolt through the track shaft broke off I tried drillin it out and using heat but it won't budge the leak was coming from The cover as its been regeared but I need to get a new out put shaft so what are my options thanks

 

[diggerdown]

I would take the broken bolt out and find a used case cover. If you can't get it out, take it into any mechanic shop. Can't imagine it should come out that hard.

 

[theUltamateTBM]

The cover is fine and I have tried everything to get the bolt out I have all the tools needed for that and I can't get it to budge

 

[mmsports]

pic?

How much is left in the gear?

 

[theUltamateTBM]

It broke of 1/4in bellow the top of the gear I was thinking about welding a nut onto it idk but on a better note I consistently held 83 mph track speed on my pulls