04 pro xr w/ 99 700 xc motor help

[pro-xr434]

im thinking about transplanting the xc motor into the pro xr...can some one give me a list of items that are not going to transfer and what i will need to buy before hand...
thanks guys

 

[02Pro-xboy]

you need motor straps from the prox 7or 8 air box and carb boots if the motor is a 99 you do not need the water pump cover other than that bolt in and go.I did this swap and love it

 

[pro-xr434]

i have twin pipes on the xc right now will they swap over or am i gonna need some new ones?

 

[02Pro-xboy]

I have twins off 01 xc 800 had to do alot of cuttin the Pro-x chassie puts the motor down at a angle you have to clear the tower bar thinkin about sellin the twins and thay dump out the side for powder ridin

 

[pro-xr434]

whats pipe should be used with out cutting just the prox pipe? did you use the xc or prox clutches? what kind of air box set up did you use?

 

[02Pro-xboy]

Pro-x 7 or 8 pipes iam usin a air box for a 04 800 ran pods and thay suck I use both the clutches 1 for out west and 1 for here and iam usin the 440 gear set up 19/43 I think