03 rev mxz rev 800 part out

[ctowles]

my y pipe bolts rattled loose, and i squeeked a piston. sled was running great beforehand, so i decided that a part out might be the best remedy. here is a small parts list...currently have everything. if you don't see it please ask, and if you need more info on any of the parts, contact me.

800 HO bottom end $500
chassey mxz 440 race chassey with 151 tunnel extension and skid setback, 440 nun, pyramid frames, and cooler lines(fair conditon) willing to bundle leftover parts too. contact me

440x front race shocks with remote resi $400
440x bar setup (w/ throttle, brake lever and cable, bar ends, mtn bar, pad) $125
riser $40
brake caliper $25
brake disc $20
steering column $40
steering rack $25
spindles $70
yellow tip loops $15
carbs $150
outer airbox $40
inner airbox $40
reed boots $75
chaincase $60
chain and gears $50
secondary cluth $100
clutch cover $20
yellow panels with vents $80
belly pan with vents $40
hood (cracked in a few spots) $30
dash $40
440x low profile race windshield $40
light $35
tail light $35
10 gallon gas tank $75
race seat (fair condition) $40
flap $20
sc10-III 151 skid (from 01-02 summit highmark) $150
jackshaft $40
polaris 151 track (missing a couple lugs) $100
mpem $150
y pipe $50
pipe $100
can $75

SOLD!
recoil SOLD
pilot 6.9 skis SOLD
one pilot 6.9 ski (black no loops) SOLD
440x lightweight cromoly front end SOLD
tie rods SOLD
440x handguards SOLD
primary clutch SOLD
console SOLD
tach SOLD

 

[ctowles]

here are a few pics of some random parts. I'll take more as i get stuff disassembled and put into crates. if there is something else you would like to see, please let me know and i'll get pics. heres a bunch more pictures of all this stuff posted on flickr site. http://www.flickr.com/photos/55830476@N04/sets/72157626027988952/

440 front end:
440x race shocks (recently rebuilt) $400
440 lightweight wide stance chromoly A Arms $250 set
tie rods $30
spindles $75

440x bar setup (includes everything currently bolted to the bars currently except handguards and riser) w/ bar ends, mtn bar, pad, throttle block and cable, brake lever and line, hand warmers. needs new grips, handwarmers may or may not work..never had em hooked up. $125

Mikuni rack carbs $175

Primary Clutch $150 (just rebuilt with new ramps, weights, rollers, bushings 10-12 rides ago) $150

Secondary clutch $100

Clutch cover $20

Pipe (no clue of the make) $100

Can $75

Outer air box (modded with more screened holes, and screen filter cover) $40

Inner air box (has a hole drilled in the top? which is covered with duct tape) $40

Side Panels with Blair Morgan decals and Vents (clutch vent has inner fine mesh behind screen) $80 for the set

Belly pan with matching vents $40

 

[pinehillscat]

How much for the whole thing with the blown up motor?

 

[ctowles]

I would take offers with local pickup, but this point there has been so much interest i think its going out of here in pieces. it is still complete currently...but a few sales are pending on parts.

 

[pinehillscat]

Ok. What are you wanting out of the complete blown up engine?

 

[ctowles]

a few more pictures. i have added a few more miscellanious shots of parts on my original flickr set. the address is in my above post.

MPEM $150

Black Console with 2011 wyoming reg $50 SOLD

Dash Panel $40

Low Profile 440 windshield (has some kind of glue on the left side that won't come off)$40

Tachometer $30 SOLD

Guage Blackout $15

Skid Flap $20

Brake Caliper $25

 

[ctowles]

bump

 

[Twostroke]

I'M interested in the black console, but think $50 is high, PM me if your willing to deal on it.

 

[ctowles]

bump

 

[ctowles]

bump!

still have many parts left. i know its late in the season, but theres snow here and people are still riding. its almost that time of year to start tinkering for next year.

i would love to move the chassy and am willing to deal on it. no reasonable offer refused. i have most of a rolling chassis minus the front end parts. if you buy the chassy i will give screamin deals on any remaining parts to the buyer. if you want alot of stuff to start building i can deal on a package price also.

get in touch if you need anything

 

[ctowles]

well that was a short summer, not enough fishin...time to start riding again soon though. looking to get back to this part out and finish emptying out the boxs in the garage. contact for whatever rev parts you need. got lots of stuff left and i'de like to move it out soon. time to get that old rev running again? i have your parts

 

[elvis69]

panels

interseted in your side panels. looks like left one might have a hole in it. pm me if you still have them and willing to deal thanks

 

[ctowles]

Ttt

 

[Aldrich]

i need ur hood screens and clips. PM me

 

[ctowles]

Sorry im a little late replying. Best way to get in touch is by pm or email, i dont always check the thread, chris_towlesATyahooDOTcom.

Dunno if I have all the clips, I use to use alot of em myself. Might still have both screens though, I can check. If I were you I might glue those screens in with some Rtv sealant, then they wouldent fall out and lose clips all the time