03 Edge RMK parting out

[Snowstar]

Parting out my 03 Edge RMK 159.

Boss seat $150 SOLD, Thanks mattymac
Gas tank $75
Custom Edge tunnel $100
Mountain Fit hood with Snowstar vent kit $150 Sold
Stock trailing arms $100 SOLD
Stock radius rods $35 (slightly bent but functional) Sold
Bellypan with Snowstar vents $100
Polaris Series 4 159, 2 1/8 track $300
Drive axle and drivers SOLD, Thanks snomofo
Digatron SOLD
Skid plate red
1200 w/c VES 225hp $4500
Lots more odds and ends parts, let me know what you need.

 

[Snowjunky]

Which model seat and what color?

 

[coal1982]

Possibly need the tunnel

I have a 2002 RMK 700 with a 136" track and the tunnel is bent. Would your tunnel work for me, and if so what other parts would I need?

Thanks,

Cole

 

[Snowstar]

The tunnel will fit to the bulkhead but the tunnel is for a 159 track. You could shorten it up or put a long track and skid under it.

 

[coal1982]

Do you still have the long track and skid?

Do you still have the long track and skid? Also would I need to regear after adding a long track?

 

[Snowstar]

I decided not to sell the skid or track, going on my next project. If you do mostly mountain riding then you should re gear.

 

[Snomofo]

looking for a drive axle

 

[rmk8hundo]

could you send pics of the hood to rmknate@aol.com? or pm them to me

 

[Snowstar]

top, lots of good stuff left

 

[IQRMK900]

looking for a gas tank for a 02 600 rmk. please send pics of yours. I bought one for a xc and it is diffrent. the tank outlet needs to be in the center as well as the vent.
pics to polaris1@traer.net
thanks
Mike

 

[cowboysedge]

I'm looking for some front shocks, do you have any?

 

[Snowstar]

Fox floats $350

 

[castlesledder]

pm'd you

 

[flying pig]

hows ur bulkhead?

 

[Snowstar]

Its trashed. The 1200 w/c was just too much for it.

 

[Snowstar]

Still got some parts left.

 

[Snowstar]

Sale on track fell threw, still for sale.

 

[built2ride]

still got the tunnel

 

[Snowstar]

Still have tunnel.

 

[twodogtom]

rod ends

do you have all the rod ends?