Ok so I got basically a multirace winning shell/B.motor for free and completely built it up with all new and aftermarket:
Billet head (sea level)[new](87 octane here in Nome, AK, we add octane boost, maybe I need to mix some AVGAS 100oct? Head I think is very high compression [I'll re-test psi]...
Top end failure, decided to go a different direction with a motor. This is a complete bottom end, from the crank down. Pictures upon request. 8015101121. Motor has approximately 60 hours on it.
I have a 600 carb engine out of a 2007 IQ RMK with 2800 miles, 700 miles since crank was rebuilt. Top end in good condition when crank was rebuilt. Good compression in both cylinders. Comes with all attached parts recoil, carbs, exhaust valves. $1100 plus shipping.
I have a 600 carb engine out of a 2007 IQ RMK with 2800 miles, 700 miles since crank was rebuilt. Top end in good condition when crank was rebuilt. Good compression in both cylinders. Comes with all attached parts recoil, carbs, exhaust valves. $1100 plus shipping.
MOTOR RAN AMAZING BEFORE REMOVED FROM MACHINE, ONLY 25 MILES!!!! ITEM HAS VERY LOW MILES, LIKE NEW CONDITION, OEM PART.
Item was removed from: 2016 SKI-DOO SUMMIT X E TEC 800 #00081. Only 25 miles on this item.
Condition: Excellent used condition. Please refer to pictures.
Asking $1900...
New to the 800 Etec motor and was wondering how many "MOUNTAIN" miles I can expect to get on my XM before I need to start tearing into the motor? Motor is stock with no mods.
I have a 13 XM now and looking at buying another for the girlfriend, but the sleds I am interested in already have over...
Hi. I gernaded my motor in my 2011 800 Pro RMK with a turbo... Sucks... Anyone have a motor for sale? I busted a cylinder skirt, and the rest is history. Any help or advice would be appreciated.
Thanks!
First brand new sled purchased, too stay away from breakdowns and problems so far over my 2.5 seasons with this sled nothing but problems. Had clutch issues all first season numerous blown belts. Second season problem continued too secondary grenaded. Finally running good and then this happens...
USED SLP Power Dome High Compression head for sale. I used this head for over 2000 miles. Its still in great shape with no nicks or dings inside domes and was taken off of a running and working motor.
According to SLP it should run on pump gas. I found out that it actually needs a mix of...
2007 M1000 motor, mild mods - head shaved, cylinders polished and crank welded. No fuel controller needed. All work done by Northern Crankshaft. Less than 1000 miles on motor. Only used for trips out west - live in MN. Runs strong, motor still in sled, can send videos from recent trip. $1,450.00...
Hi I'm looking for a motor for my buddy's sled. It blew up a couple weeks ago and the left piston completely grenaded the head, and cracked the lower block. I've done a bit of research in the last week and now know of sea-doo clinic and the work they do. They have a new 800 motor but the price...
My buddy blew up his m7 carb motor. The crank case cracked when the cylinder skirt broke. So anybody know where we can get a complete motor or and crank case and cylinders. The crank is still good but everything else is shot. Any help would be appreicated!! Thanks
Need a motor for my 03 Mountain Cat 800 EFI, I think 02-04 the motors were the same. Would also be interested in your wrecked sled if your located in Washington.
PM me with what you have.
SPI Billet Head 6,000' +
2009 XP 800R motor
Only 7 trips on head, getting big bore, need different head
Excellent shape!
$150 + shipping
I live in Mpls, MN
Parting out 2002 rmk 800
Boss seat $150 ....it's standard height
Stock seat...perfect condition $150
156 fully clipped track $350
156 skid with no rear shock....will sell in parts
Mountain bars $100 or $150 w/ pivot riser and extended brake line
Racepak avenger egt with dual probes $150
Red...
I have a complete engine for sale out of a 2005 M7. The engine is in great shape it had around 2850 miles on the sled. I took the engine out of the sled because I am dropping a D&D 1147 in the chassis. The throttle bodies and recoil will go with the motor. The clutch and ECU will NOT go with...
I have a bunch of parts. I have a Genesis 800 ready to rock. i have the twin pipes for the 800. I have the carbs, water pump housing c/w ignition (installed, 2002 model year). I have the oil injection system for this model year. I have a P85 primary clutch and a Cat secondary with a...
1250 miles on my sled, I'm out with my 7 year old daughter, taking her for a road ride since snow is lacking and 12 miles into my first ride of the season last Saturday it burns down. Ski-Doo dealer is no help! $2500 in parts to rebuild!
I am looking to sell my chassis in perfect condition for...
2003 Arctic Cat 800 efi motor Part # 0662-324 new still in box from Arctic Cat $1700.00 OBO email me at kim@srcc.biz or call 503-310-7729 I will have it at the Spokane and Boise snow show if you would like to see it