cylinder

So... Acquired a 2010 Polaris Rush Pro R 600 with bad crank, got a 2012 motor sent up here to remote AK. Did the swap, new SPI pistons & one cylinder was bad, compression tested it to 50-90psi, other cyl 120... sent the bad one to Darby's Performance in Fairbanks who returned me a used/honed...

Brand new Cylinder Works complete top end cylinder kit for 2006-2009 YZ450F and 2007-2015 WR450F. Stock bore and stock compression. Includes everything you need; cylinder, piston, rings, wrist pin, clips and top end gasket set. Retail price was $516, I will sell it for $450 and ship free to the...

Hello I am looking for one hopefully two polairs 800 ves cylinders. Or possibly a whole engine. Let me know what you may have laying around. Thanks in advance.

Hey guys, I'm purchasing a used cylinder for my 2003 Vertical Escape RMK 800. The number on it is 3021339. Is it compatible with the Edge 3021329 cylinder? I'm told it is, just need to have some confirmation.

I have a new in box m8 cylinder and piston works with 07-09 non ho motors. Looking for 200

Hi All, First of all, I have been reading your posts for the last two seasons and thank you! I've learned a ton. That said, my 05 RMK w/ a Carl's 975 kit took a dive last Saturday. I took off the top end and while the pistons/cylinders did not seize, a portion of the lower housing on one...

I've got what mat just be a stupid question??? I am on the hunt for a good used cylinder for a 99 Summit X 670. Are the cylinders the same as the Summit 670's? They are the same bore size stock, which is 78mm. I've looked up the parts on Ski-DoopartsWarehouse.com, the measurements for the...

Looking for Jugs for a 2009 Dragon 800cfi. RMK, IQ, Assault

Sold all! Thanks to all buyers and shoppers, Polaris Dragon 800 Monoblock Cylinder & Crankcase & Crank For 2009 Polaris Dragon 800 cc Used crankcase upper and lower half $300.00 Shipping weight 14 Pounds Used Monoblock Cylinder set $100.00 Need replated GOOD FOR EXCHANGE...

I have a set of freshly replated cylinders for a Ski-doo 800r engine (non-etec) with pistons. The cylinders have never been installed, no core charge, the pistons are new, they were installed on a BRP re-manufactured short-block, but never run. Comes with a top end gasket set and new clips...

I have 2 cylinders and head for a M1000 bored out to 1200. I have 1 extra barely used piston for it. Pistons run around $190 each. Don't have the sled anymore, no need for these spare cylinders. $800 takes it all. PM me if interested SOLD

Hi, I am in need of a good cylinder and head for my 03 700 summit zx turbo project, cash in hand and can help with shipping logistics, let me know what you have!!!! thanks in advance!!:usa2:

need to bore to fit 90.85 mm piston and able to be ported.

SOLD

F/S is a cylinder head for an 800R motor. It has been milled by BJ (I don't know how much). It is in excellent shape and will fit 07-10 800R engines. $200 Mark 360-840-5293