• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Will the 09 M spindles fit on the 07 M

1

1100Cat

Well-known member
Nov 29, 2007
1,107
56
48
51
Does anyone know if the 09 spindles will fit the 07 sleds and if so is the turning radius better than the 08 spindles.
 
S

Samurai

ACCOUNT CLOSED
Nov 26, 2007
698
126
43
61
CALGARY
Can be done with new spindles and tie rod/ steering plate cross over parts. Steering is much improved over 07.
Cost in States about 50 buck---Cost in Canada about 5000.00 bucks:confused::mad:;):eek::face-icon-small-win
 
1
Nov 26, 2007
530
52
28
Wisconsin
I put 2008 spindles on my 2007 and all I changed was the two spindles and ball joint ends by the spindles but I could never get the ski alignment quite right but it's ride-able.


This is what you would need to do it right.


1705-262 Arm, Shaft - Right (inc. one No. 5) $26.00 1 $26.00

1705-263 Arm, Shaft - Left (inc. one No. 5) $26.00 1 $26.00

2603-721 Axle, Steering Link $0.77 2 $1.54

1705-224 Link, Steering (inc. 9) $27.16 1 $27.16

0623-987 Washer $2.29 2 $4.58

8047-426 Nut, Lock $0.42 2 $0.84

0605-944 Tube, Tie Rod - Spindle $14.10 2 $28.20

0605-607 Ball Joint, Tie Rod - Left-Hand Thread $19.20 2 $38.40

1623-741 Screw, Cap $2.29 2 $4.58

8020-226 Screw, Cap $1.01 2 $2.02

0605-788 Ball Joint, Tie Rod - Right-Hand Thread $21.50 2 $43.00

8047-486 Nut, Lock $0.66 2 $1.32

2703-246 Spindle, Steering - Right (inc. 15-18) $115.00 1 $115.00

2703-247 Spindle, Steering - Left (inc. 15-18) $115.00 1 $115.00


Subtotal: $433.64

2008 and 2009 are the same.
 
Last edited:
S

Samurai

ACCOUNT CLOSED
Nov 26, 2007
698
126
43
61
CALGARY
This is what you would need to do it right.


1705-262 Arm, Shaft - Right (inc. one No. 5) $26.00 1 $26.00

1705-263 Arm, Shaft - Left (inc. one No. 5) $26.00 1 $26.00

2603-721 Axle, Steering Link $0.77 2 $1.54

1705-224 Link, Steering (inc. 9) $27.16 1 $27.16

0623-987 Washer $2.29 2 $4.58

8047-426 Nut, Lock $0.42 2 $0.84

0605-944 Tube, Tie Rod - Spindle $14.10 2 $28.20

0605-607 Ball Joint, Tie Rod - Left-Hand Thread $19.20 2 $38.40

1623-741 Screw, Cap $2.29 2 $4.58

8020-226 Screw, Cap $1.01 2 $2.02

0605-788 Ball Joint, Tie Rod - Right-Hand Thread $21.50 2 $43.00

8047-486 Nut, Lock $0.66 2 $1.32

2703-246 Spindle, Steering - Right (inc. 15-18) $115.00 1 $115.00

2703-247 Spindle, Steering - Left (inc. 15-18) $115.00 1 $115.00


Subtotal: $433.64

2008 and 2009 are the same.



I'll take 2 sets;) Over 500 bucks for spindles alone here in Canada:eek:
Canadians are such nice people ,permanently bent over and looking to please.

Good post..Thank You
 
N

Nubulin

Well-known member
Oct 26, 2005
848
206
43
Flatlands USA :(
I was able to convert my 07 for less than that.

All you need is:
R and L spindles
08/09 spindle ball ends
2 jam nuts

Then flip both tie rods around, remove the old inner ball end (now on the outside) and replace with the new spindle ball end (that is narrower and fits the new spindle. You need to flip them to get the threading correct for the new spindle ball end.

Mine worked very nicely and was around $275 to do complete.
 
Premium Features