B
Want to swap electric start on the wife’s sled and need a clutch with a ring gear. I found one from a 2018 pro 800
Will a P85 clutch from a 2018 pro 800 fit a 2022 matryx 850?
- Thread starter Backcountry proclimb
- Start date
B
Different part numbers on polaris website…
will not fit...800 is a 32 mm crank the 850 is 33mm crank....
B
Thank you!
Crank different.
B
If anyone has an electric start clutch for an 850 they are looking to sell I’d be interested
B
Side question… anyone know if a 850 P85 will fit on a Boost with the P22??
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
C
That is the p85 everyone is swapping.
2020 800 has the same crank taper as the 850.
Sent from my SM-G998U using Tapatalk
Sent from my SM-G998U using Tapatalk
Yea, any 800 or 850 p-85 2020 and newer is a direct bolt on to replace the P-22. You will need the p-85 clutch bolt and washer.
I was wrong your right the newer 800 have a 33 mm crank...Had to verify.
C
SLP Clutch Puller
SLP's clutch pullers are designed to pull even the toughest clutches that other pullers struggle with. Made of high quality heat treated material, this tool is built to last.
#20-136 will pull every twin from 00-23 except if they have a p22.
If you have a different puller, make sure it hits the crank and isn't just binding in the threads. Water and a 3/4nf bolt with some Teflon on the threads is always a solid option if it comes to it.
Similar threads
