who's tried various helix's on RKT set-ups?

[Spook]

I am considering different helix's for my 06 M7. I am not to fuzzy about the standard 36 that every one enjoys.

Who has tried other angles that seemed to work from 3-6k?

Any one have a multi set-up.

 

[spanky]

rkt

I have 2 rides on the "36" not real impressed. i think 36/34 would be better but don't know anybody that has ran it.

 

[MUZBOMB]

I had a 34/36 that i used at 2000ft to 8000ft. It worked awsome loved it. RKT makes awsome products and it is proven, i rode with out it and with it was an amazing difference. RKT all the way.

 

[spanky]

I'm not bashing rkt at all. I ride at 6 to 10000 ft. 2ft of new snow today on a m1000,slp y and single,vforce,vents,boss,diomaond s, riser, bd box and 80 shot nos. the 36 rkt made a diff but personally i think the 36/34 would be tts.

 

[MUZBOMB]

I'm not bashing rkt at all. I ride at 6 to 10000 ft. 2ft of new snow today on a m1000,slp y and single,vforce,vents,boss,diomaond s, riser, bd box and 80 shot nos. the 36 rkt made a diff but personally i think the 36/34 would be tts.

You are right, personally i think the 36/34 would be an awsome set up for you. I loved the 36/34 when i had it on my old sled, I am looking at buying another for my HCR.

 

[Spook]

You are right, personally i think the 36/34 would be an awsome set up for you. I loved the 36/34 when i had it on my old sled, I am looking at buying another for my HCR.

Are you saying 34/46. Or 36/34 for an M7 for 3-6k..

 

[JHG]

Are you saying 34/46. Or 36/34 for an M7 for 3-6k..

I think a 34/46 will be a little steep for the mountains. 36/34 or 38/34 might be a better choice.

 

[scrapmaster]

im currently running the 36/34 majority of my ridings 6000-9000 made the biggest improvment frm stock for sure

 

[MUZBOMB]

Are you saying 34/46. Or 36/34 for an M7 for 3-6k..

36/34 i would go with

 

[dmkhnr]

I use a 38-34 with RKT porting/Head M8 powerclaw 62. The 34 allows you to load the clutch. I ride at 10k elev and spin 8100+ RPM with 75# weights climbing in 3' of powder. I hold my flipper wide open like this 2 minutes at a time.

 

[Icedog]

I'm happy with the 38/36 - Sno Pro green in my M8. Pulls the AC gold primary with 72.7g weights no problem @ 5000-8500'.

 

[Wood]

Has anyone tried any reverse cut cams?

 

[scrapmaster]

out of curiosity what setting has everyone been running theirs in? iv been running 2nd +3rd from the left so far seems pretty good but curious what others have found?

 

[Spook]

OK on that note. Who has a 38/34, or a 36/34 helix for sale?

My kit is the 09 style. Not that it matters on the helix. It's on an M7 so I don't require the reverse..

Let me know I need it..

 

[Icedog]

out of curiosity what setting has everyone been running theirs in? iv been running 2nd +3rd from the left so far seems pretty good but curious what others have found?

Softest for me. I'm going to go down to the red/white and see if I like that better than the SP green next.

 

[tntm7]

RK tech

I run a 38 helix and love it, everyone thinks I am nuts including Kelsy at RK tech, he said I would hate it.
I have a 06 m7, 800BB kit, ported, speed werx pipe, stock can, boondocker nitrous kit.
I seem to loose nothing with the 38 on motor and gained 5mph track speed on the nitrous over the 36 helix.
I have 65grm cat weights, 160-310 primary spring, cutler Redwhite rear spring, 10.4 rear clutch. 2.66 gearing, 2.5x162 extreme
I run 38-44mph track speeds and 51-58 on nitrous.
everyone who see's the sled climb is impressed. runs right with a 880 skidoo without n2O

 

[M7-Ballz 2 the Wall]

OK on that note. Who has a 38/34, or a 36/34 helix for sale?

My kit is the 09 style. Not that it matters on the helix. It's on an M7 so I don't require the reverse..

Let me know I need it..

Spook, Did you ever find the SP green spring for your set-up? I'm running the 38/34P helix in mine, It works great, finally got it to top out at 8100 rpm

 

[Spook]

Spook, Did you ever find the SP green spring for your set-up? I'm running the 38/34P helix in mine, It works great, finally got it to top out at 8100 rpm

Ballz,

Hey man what's up?

I did get the spring and it help ton's. Now I just want to dial it in better. From the last time you were here to now it's almost night and day.

Are you all going to make it for the climb? If the trophy class pulls through it would be a good place to start.

 

[M7-Ballz 2 the Wall]

Ballz,

Hey man what's up?

I did get the spring and it help ton's. Now I just want to dial it in better. From the last time you were here to now it's almost night and day.

Are you all going to make it for the climb? If the trophy class pulls through it would be a good place to start.

Yep, Me and Ross are headed down with some friends for that weekend. Good to here that your that you got that spring. Hopefully the trophy class works out, either way I'd love to run in the hillclimb. See you there

 

[Headrush]

Is there an easy way to see what angle helix is in the RK set up with minimal effort? i just bought a used M8 and am looking at a SLP exhaust system and don't want to dick with a new helix.