Wanted to know if a perc from a 2005 900 would work in a 99 rmk 600 engine that i am installing in a 2001 800 chassis. HELP ANYONE 
THANKS THE DUK
THANKS THE DUK
perc
- Thread starter Snow Duck
- Start date
R
The short answer is NO. Perc uses the CDI or ECM to vary the timing advance in order to make the engine run backwards. I know of no way to use a 900 Ecm on a carberated 600.
L
Agree - UR gonna have to go with the old mechanical system or a newer engine. At that point, probably better to buy a used sled that come with Perc. You can get them for under $3K these days.....
Wanted to know if a perc from a 2005 900 would work in a 99 rmk 600 engine that i am installing in a 2001 800 chassis. HELP ANYONE
THANKS THE DUK
Try calling Dave Gazeley (701) 840-0663
He sells brand new POLARIS PERC units (INCLUDES TACH, NEW ROLLER SECONDARY W/HELIX, WIRING HARNESS, LEFT HAND CONTROLS, ETC) for only $275.00 and may have some tips for it working on a '99 model engine. When I spoke w/him last winter he said you could run one of his kits on a 2001 edge 600 just by using a 4* offset timing key if I remember correctly.
Good Luck
Last edited:
Similar threads
