Need help on an 01 600 xc engine

[buggyfreak34]

I need to know where I can find a cdi/coil box for a 600xc. I have looked all over and the only thing I have found is a used one on E bay for a 440 indy.

 

[MARV1]

Swap section, mohawksalvage.com. I sold the spare cdi I had, only have an '04 PERC one. Coil I may have.

 

[buggyfreak34]

OK, I have a few more questions.
The motor is in a mini buggy I built. I just got it together and took it out yesterday. I was able to pull about 8300 rmps, is that a good number or can I get a bit more out of it with clutching and jetting?
Second can I get a new brass elbow for the oil pump, the one one the supply side?

 

[BB454]

Cdi

Looks like the CDI is unique to the 2000-2001. Coils are used in a bunch of places. 8300 is plenty of RPM, run it.

 

[Kraven]

OK, I have a few more questions.
The motor is in a mini buggy I built. I just got it together and took it out yesterday. I was able to pull about 8300 rmps, is that a good number or can I get a bit more out of it with clutching and jetting?
Second can I get a new brass elbow for the oil pump, the one one the supply side?

I had a 2001 EDGE-X 600 STOCK except for hi-comp head, jetted down to 400 mains (430 stock) 1200 feet elevation, I clutched for 8000 R.PM. Ran real strong, dyno test sheet that I have has power falling off after 8100 R.P.M.

 

[buggyfreak34]

I saw that a 2002 sportsman 700 uses a digital coil like mine. It looks the same maybe it will work for me?
Also I would like some opinions on just running premix with no oil injection. I have seen many different thought on this. Some say that pre 2002 polaris engines have holes alrady in the case for oiling. Is there are facts to back this up with out splitting my case?