S
I have a 2006 M7 162” Cat that i recently purchased as a “project rebuild”. This project of course is hard to keep out of the red if you know what i mean. Anyhow the project is finally down to the track and drivers(track is torn and in rough shape as well as the drivers. A friend of mine has a very decent track off of a 2014 Polaris RMK 163”. Now for the question do any of the forum personelle know of where(or if possible) they make a 2.86 8 tooth with the 1.8” hexshaft driver. There are lots of drivers out there for Cats all with 1”-1.25” but none that i have found for approx.1.8” hexdriveshaft. This includes Wahl, Cat and kimpex. Your help would greatly appreciated. Ed
