Item: Dunn / MoTeC 1200 Turbo
Category: Sled
Year: Completed 2015
Location: Colorado
Price: $16,500 FIRM. Over $35k into it.
Dunn Performance, MoTeC 1200 Turbo f/s
Brand new project, just completed. Less than 40 miles on sled.
(1) Dunn Performance built motor - brand new!
(2) Precision Sports tuned full MoTeC stand alone system w/ knock, lambda, logging, SLM, ID-1000, header
(3) Felker Motorsports built XS/XM Chasis, suspension, drivetrain
(4) Could be converted for drag racing, or trail use w/ included Renegade tunnel, skid & track
Simply massive power!
PM with questions or call/txt (303) 378-500Five. Thanks.
Built Motor
- Dunn Performance built motor
- 2015 block
- Decked
- Carillo rods
- JE pistons
- Solid motor mounts
- Dunn head studs
- HD valve springs
- Precision Sports header
- Precision Turbo & Engine CEA Ceramic ball-bearing turbo
- Tial wastegate
- Tial blow of valve
- Garret intercooler w/ tanks
- 3” exhaust w/ inline Burns muffler
- 3” cold air intake w/ Boondockers cage
- OSP surge tank, transfer pump
- upgraded fuel pump with regulator, pressure gage
- brand new, only a few hours on it!
- will include Hurricane Block (also, brand new & never run)
Electronics
- MoTeC M400 Standalone ECU
- ID 1000 injectors
- Knock sensor
- Electronic boost control
- Closed loop lambda
- LSU4.2 O2 sensor
- Data logging enable
- 9-Position Switch
- MoTeC wiring loom
- SLM LED instrument
- IGN4, protection
- AntiGravity LiPO4 battery (YTL12-24)
- pump gas or VP race fuel mapping (14 to 45 PSI)
- Warranty on MoTeC M400
- SkiDoo premium gage cluster
- WRP gage lifter / vent
- Fly Racing start button
- KTM grip warmers
Drivetrain
- HRP Quad Cam primary
- HRP outboard clutch brace
- QRS driven pulley (2015)
- STM driven brace
- AVID extended chain case
- AVID Reinforced drive shaft
- Camoplast 162” x 3” x 16” Challenger extreme track
- 10.5” Billet aluminum big wheels (4x)
- 391 belts (3x spares)
- new, never run FPP solid shaft for Team driven included
Chassis
- XR bulkhead & motor mount
- 162” SkiDoo tunnel
- Holz Alpha-X Skid w/ Fox Evol R air shock
- Holz Front End w/ Fox Evol R air shocks
- Skinz Airframe running boards
- 600RS Spindles (2014)
- C&A Razor skis (included)
- ice scratchers
- SkiDoo race department’s Lexan hood (600RS MOD)
- Frogskinz vents
- Holz vents
- Racewerx front bumper / S-Module brace
- SkiDoo XM lightweight seat
- FLY Racing riser
- Fly Racing carbon fiber bars
- also included is brand-new OEM Renegade tunnel, skid & track
Category: Sled
Year: Completed 2015
Location: Colorado
Price: $16,500 FIRM. Over $35k into it.
Dunn Performance, MoTeC 1200 Turbo f/s
Brand new project, just completed. Less than 40 miles on sled.
(1) Dunn Performance built motor - brand new!
(2) Precision Sports tuned full MoTeC stand alone system w/ knock, lambda, logging, SLM, ID-1000, header
(3) Felker Motorsports built XS/XM Chasis, suspension, drivetrain
(4) Could be converted for drag racing, or trail use w/ included Renegade tunnel, skid & track
Simply massive power!
PM with questions or call/txt (303) 378-500Five. Thanks.
Built Motor
- Dunn Performance built motor
- 2015 block
- Decked
- Carillo rods
- JE pistons
- Solid motor mounts
- Dunn head studs
- HD valve springs
- Precision Sports header
- Precision Turbo & Engine CEA Ceramic ball-bearing turbo
- Tial wastegate
- Tial blow of valve
- Garret intercooler w/ tanks
- 3” exhaust w/ inline Burns muffler
- 3” cold air intake w/ Boondockers cage
- OSP surge tank, transfer pump
- upgraded fuel pump with regulator, pressure gage
- brand new, only a few hours on it!
- will include Hurricane Block (also, brand new & never run)
Electronics
- MoTeC M400 Standalone ECU
- ID 1000 injectors
- Knock sensor
- Electronic boost control
- Closed loop lambda
- LSU4.2 O2 sensor
- Data logging enable
- 9-Position Switch
- MoTeC wiring loom
- SLM LED instrument
- IGN4, protection
- AntiGravity LiPO4 battery (YTL12-24)
- pump gas or VP race fuel mapping (14 to 45 PSI)
- Warranty on MoTeC M400
- SkiDoo premium gage cluster
- WRP gage lifter / vent
- Fly Racing start button
- KTM grip warmers
Drivetrain
- HRP Quad Cam primary
- HRP outboard clutch brace
- QRS driven pulley (2015)
- STM driven brace
- AVID extended chain case
- AVID Reinforced drive shaft
- Camoplast 162” x 3” x 16” Challenger extreme track
- 10.5” Billet aluminum big wheels (4x)
- 391 belts (3x spares)
- new, never run FPP solid shaft for Team driven included
Chassis
- XR bulkhead & motor mount
- 162” SkiDoo tunnel
- Holz Alpha-X Skid w/ Fox Evol R air shock
- Holz Front End w/ Fox Evol R air shocks
- Skinz Airframe running boards
- 600RS Spindles (2014)
- C&A Razor skis (included)
- ice scratchers
- SkiDoo race department’s Lexan hood (600RS MOD)
- Frogskinz vents
- Holz vents
- Racewerx front bumper / S-Module brace
- SkiDoo XM lightweight seat
- FLY Racing riser
- Fly Racing carbon fiber bars
- also included is brand-new OEM Renegade tunnel, skid & track
Last edited:
