Kids Mountain Sled

Turblue

Well-known member

Lifetime Membership

• Oct 14, 2012

• #1

Yamaha kids mountain sled

Here is the start of my kids mountain sled... plan on installing a 121x12x1.30ish track, yamaha 121 skid, new risers and bars, get the seat foam profile revamped and covered, paint, decals, powder coat, plastic skis etc.....so far i have the skid in place, just need to make some spacers, cross shafts, cut the rail tips shorter.....

 

Last edited: Oct 21, 2012

V

volcano buster

Well-known member

• Oct 14, 2012

• #2

What are you planning to use for a track? A snowbike track, or a 15" track narrowed down?

 

Turblue

Well-known member

Lifetime Membership

• Oct 14, 2012

• #3

121x12.5x1.3ish 2.52 pitch....either cut a used one down or get a new one from tracks USA and get them to cut it

 

Snow Duck

The Great and Mighty SnowDuck

Staff member

Lifetime Membership

• Oct 15, 2012

• #4

very cool build!! keep us posted and pics please!

 

Turblue

Well-known member

Lifetime Membership

• Oct 15, 2012

• #5

so had a Cr racing tunnel extension that was damage....so cut it up to se how the tunnel will work out....i think its going to look sweet...I think Chad at Cr is going to help me out with the tunnel....it going to be a mini version of mine...although my daughter figure pink would be a better choice....lol....Murray at Mountain Mod is going to re work the seat for me....

 

Turblue

Well-known member

Lifetime Membership

• Oct 18, 2012

• #6

tacking brackets for the tunnel mounting....

 

Turblue

Well-known member

Lifetime Membership

• Oct 19, 2012

• #7

new boards.....rough cut the plastic need to true up the edge

 

Turblue

Well-known member

Lifetime Membership

• Oct 19, 2012

• #8

 

ryanjeri

Well-known member

Lifetime Membership

• Oct 19, 2012

• #9

Dang cool.

Turblue said:

Click to expand...

 

Turblue

Well-known member

Lifetime Membership

• Oct 21, 2012

• #10

well...need to finish welding the boards and tunnel tabs....sandblast and powder coat....also have a real close template for how the tunnel will fit....

 

Vertical-Extreme

Well-known member

Lifetime Membership

• Oct 22, 2012

• #11

sweet man, I can get you a 121 x 15 x 1 if you want. it is in kinda rough shape, but the price is right. fire me a text if you are interested

 

S

stomper

Free Member

• Nov 19, 2012

• #12

Cool build. Are there any updates, I would love to see how this turns out

 

Turblue

Well-known member

Lifetime Membership

• Nov 30, 2012

• #13

well parts back from powder coaters....

 

Turblue

Well-known member

Lifetime Membership

• Dec 1, 2012

• #14

 

xc_rider08

Well-known member

Lifetime Membership

• Dec 2, 2012

• #15

sweet build so far. keep up the good work!

 

Turblue

Well-known member

Lifetime Membership

• Dec 2, 2012

• #16

cut track down to 12.5" wide....worked very well clamping a piece of angle iron along the lugs and use the recip saw....

 

V

volcano buster

Well-known member

• Dec 2, 2012

• #17

Good to know.

We used a table saw last weekend on one. It made a nice cut and lots of smoke. I just got the track back under this one, but need to make a couple clearance points for the rear axle then it should bolt up. The turbo is on back-order!

 

Turblue

Well-known member

Lifetime Membership

• Dec 2, 2012

• #18

No smoke .......nice straight cut.....

 

K

Kibbels

Member

• Dec 4, 2012

• #19

Ummm why is the Apex apart!

 

V

volcano buster

Well-known member

• Dec 6, 2012

• #20

Kibbels said:

Ummm why is the Apex apart!

Click to expand...

Motor donor