• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

700sx psi pipes to 600sx

Anylizer

Well-known member
Lifetime Membership
May 17, 2005
581
131
43
Top 'O the Great Basin... almost
I know of a few guys who went the other way... 600 pipes on the 700. this was done for use at higher elevations. I cannot comment on the jetting specs, but I would think that they would run, although maybe not ideal.
IIRC, there was a slight difference in the initial diameter/taper of the header & diffuser cone.
When used on the 700, the 600 pipes seemed to have increased throttle response.
 
M
Sep 12, 2013
7
0
1
30
I also thought it should work, because the stock in both have the same pipe 600 & 700. If somebody have experience of that, please let me know.
 

TRIPLESWILLNEVERDIE!

Well-known member
Lifetime Membership
Feb 19, 2008
526
74
28
Northwest, MT
I have tried a few sets of 700 pipes on the 600. Bender, SLP, Aaen. All had throttle response issues. I spent a lot of hours jetting and never got it right. Ended up running the stock single with Bender race can and had better performance than I did with the triples.
If you try the psi 700 pipes you may have to weld in some reducer rings into the stinger outlets.
 
M
Sep 12, 2013
7
0
1
30
but in the slp home site, seems to be same production number on both pipes, 600sx and 700 sx. feels like they should atleast work on 600.
 

TRIPLESWILLNEVERDIE!

Well-known member
Lifetime Membership
Feb 19, 2008
526
74
28
Northwest, MT
Yea, I don't think slp made a specific set of triples for the 600. They are just the same as the 700 pipes.
Bender made a specific set for the 600. The stinger diameter was smaller than the 700 pipes. expansion chamber size was the same.
 
Premium Features