D
has anybody run a 3" track wondering whats involved for tunnel and bulkhead clearance,mine is an 04 kingcat
3" track on kingcat
- Thread starter diirtbag
- Start date
Good question..
M
I just got chills, thinking about a 3" on the ol King Cat.
Will some one answer this PLEASE!!!
D
I have been looking at mine and it looks like a 3" would just fit but have no extra room and would rub around the sprocket with 8 tooth drivers so what kind of clearance would going with 7 tooth give me,can anyone give a measurment for 7 tooth driver
You can figure out the diameter of the sprockets if you know the pitch and number of teeth:
Pitch: 3"
Teeth: 7 or 8
Circumference = Pitch * teeth
Diameter = Circumference/pi (3.14 is a good enough approx.)
Also, with the 3" pitch drivers, the pitch and pi are pretty close, so the diameter is roughly the same as the number of teeth.
Pitch: 3"
Teeth: 7 or 8
Circumference = Pitch * teeth
Diameter = Circumference/pi (3.14 is a good enough approx.)
Also, with the 3" pitch drivers, the pitch and pi are pretty close, so the diameter is roughly the same as the number of teeth.
W
3" track
There is a fella here in the Flathead Valley, Montana, his name is Robby Holman. He has a small business that deals with 3" tracks and the products needed to run them. I will search around to see if I can figure out what his web site is called. I have read other threads about this subject in the past. These guys really have it dialed in and ride 174 x 3 tracks and love them.
Kelly
There is a fella here in the Flathead Valley, Montana, his name is Robby Holman. He has a small business that deals with 3" tracks and the products needed to run them. I will search around to see if I can figure out what his web site is called. I have read other threads about this subject in the past. These guys really have it dialed in and ride 174 x 3 tracks and love them.
Kelly
H
The company is Avid Outdoors. They should be able to tell you if there is any clearance issues.
T
track
Figure it out boys,cause I want one!!!!!
Figure it out boys,cause I want one!!!!!
