ZRT parts

M

Meatman

Well-known member

Lifetime Membership

Nov 26, 2007

11,758

694

113

39

• Jun 16, 2009

• #1

I got a buddy that has a 96 ZRT 800 and he's lookin for a parts sled the motor runs strong but he needs a bulkhead and some smaller things...just figured i'd stop by in here and see if there are any of these things left out there:beer;

 

M

Meatman

Well-known member

Lifetime Membership

Nov 26, 2007

11,758

694

113

39

• Jun 16, 2009

• #2

new question...will an 04 bulkhead off a 1M fit?

 

Idcatman3

MODERATOR: Premium Member

Staff member

Nov 26, 2007

2,234

866

113

39

Idaho Falls, Idaho

• Jun 17, 2009

• #3

I'd have to ask some questions to be sure, but I don't think the bulkhead would fit if that was all you were changing.

You could put that motor into an '04 chassis. You'd need motor mounts off a '99+ ZRT800/Tcat and the jackshaft motor mount from a 600 1M. Then either re-work the pipes or get some from a newer sled and put ZRT2 plastic on it.

 

M

Meatman

Well-known member

Lifetime Membership

Nov 26, 2007

11,758

694

113

39

• Jun 17, 2009

• #4

thanks for the info...maybe ill just pick up an old ZRT bulkhead

 

S

Spud

Well-known member

Mar 5, 2003

2,132

199

63

Lewistown,MT-USA

• Jun 17, 2009

• #5

AWS 4 and the AWS 5 are the same other than the 4 is steel and the 5 is aluminum. They will interchange. The old plastic will work as well as the newer style...

 

Idcatman3

MODERATOR: Premium Member

Staff member

Nov 26, 2007

2,234

866

113

39

Idaho Falls, Idaho

• Jun 17, 2009

• #6

Spud said:

AWS 4 and the AWS 5 are the same other than the 4 is steel and the 5 is aluminum. They will interchange. The old plastic will work as well as the newer style...

Click to expand...

Some of the geometry is similar, but they are not the same.

AWS 4:

AWS 5:

 

M

Meatman

Well-known member

Lifetime Membership

Nov 26, 2007

11,758

694

113

39

• Jun 17, 2009

• #7

i do know that the tie rods on the 4 is longer than the one on the 5

 

S

Spud

Well-known member

Mar 5, 2003

2,132

199

63

Lewistown,MT-USA

• Jun 18, 2009

• #8

hmmmm. looks like I might find out about this myself soon enough beings as though my old Cutler aluminum bulkhead is cracking-breaking in places that I have welded over a few times already. This is an older 94 chassis with Newer T-Cat plastic. Everything fit in fine when I done this project 7 years ago and now I am looking at replacing my cutler bulkhead with a newer factory aluminum bulkhead so I guess we will see...

 

Idcatman1

Well-known member

Lifetime Membership

Nov 26, 2007

900

125

43

Ashton, Idaho

• Jun 18, 2009

• #9

I have a 600 ZRT bulkhead in good shape. The part numbers are different but I think the differences are minor things like exhaust mount tabs etc. I would take $100 shipped to you or might be able to bring it to Haydays in September.

 

M

Meatman

Well-known member

Lifetime Membership

Nov 26, 2007

11,758

694

113

39

• Jun 18, 2009

• #10

let me find out about the differences in the two...if it works and you dont mind bringing it to haydays i'll be there and that would work out great...thanks

-meat

 

S

Spud

Well-known member

Mar 5, 2003

2,132

199

63

Lewistown,MT-USA

• Jun 18, 2009

• #11

Idcatman1 said:

I have a 600 ZRT bulkhead in good shape. The part numbers are different but I think the differences are minor things like exhaust mount tabs etc. I would take $100 shipped to you or might be able to bring it to Haydays in September.

Click to expand...

EXACTLY! also motor mounts can vary but apply to the 2 same bulkheads.
is that an aluminum one for the ZRT6 or not Idcatmn?

 

S

Spud

Well-known member

Mar 5, 2003

2,132

199

63

Lewistown,MT-USA

• Jun 18, 2009

• #12

got your pm Id1:face-icon-small-coo