Here is the story. The '05 (mod hoop) bulkhead and tunnel with '06 plastic was bought as a trail ready IQ from Brad (IQ1200 on HCS). I was originally going to part it out to finish a couple of other projects, but the Chassis was cleaner and straighter than anything I had. I had a Carl's Cycle VES660 sitting on my shelf with no miles on a Carl's rebuild (It was cold seized by the previous owner) so i dropped it in. The chassis has been raced, ridden and beat. It is straight, clean and VERY well maintained. I have tuned it and put 300 miles on this combo so It is ready to go. $5900
List of highlights:
Carls 660
Oil Injection
121 race track w/studs
2" drop spindles w/FTA skid relocate
C&A Pro Skis
FRESH Ditch Valved Shocks
Rox treads with grip screws
SLP style single pipe
THe lowlights:
7? broken studs (it will come with LOTS of replacements)
standard dings and scratches (its not brand new)
Thumb nail chip in top corner of hood
If you are interested, Call my shop @ 218-387-1161 or my cell @218-343-5966
Anybody interested in this sled as a roller? C+A Pro's, Brad's 2" spindles, Trail tank, Oil tank, clean registration. Basically everything but motor, pipe, carbs, CDI and Primary.
Here is some pics I took during the build, hopefully this conveys how clean this sled truly is. I had another great weekend of riding on this weekend. The pipe in the pic was only used for mock up. the pipe the sled is using can be seen in the photos above. It is using that modded 440 can though. Good sound and it fits awesome. Also, the 05 shocks were just for mock up. it has the piggyback W/E's now.
I live just across the border from Thunder Bay, Ontario so if you are a Canadian buyer and you are interested, I can meet you at either the Pigeon River or International Falls border crossings to fill out paperwork. Also if you live in the states, contact me about delivery options, I like road trips.